Whirlpool Washer Stuck on Sensing?

Whirlpool Washer Stuck on Sensing? Discover the Best Fixes!

Ever had your morning hijacked by an unruly whirlpool washer stuck on sensing? I have. One might ask, why all the fuss about a laundry machine? Well, if you're like me, a busy bee with a tightly packed schedule, this issue can throw your day into chaos, leaving you with a pile of unwashed clothes.

Key Takeaways:

  1. A whirlpool washer stuck on sensing can disrupt your daily routine, but rest assured, this problem can be resolved without disassembling the machine.
  2. Simple strategies like resetting the washer, checking the wash settings, or running diagnostics mode can identify and rectify the issue.
  3. If the problem persists, it could be due to a defective water inlet valve, a faulty shift actuator, or a problem with the main control board, requiring professional intervention.

So, you see, this seemingly small problem can pack a punch. Want to learn more? Dive into the full article to reclaim your daily routine from the grip of your washer.

'Whirlpool Washer Stuck on Sensing Mode'

When your Whirlpool washer is stuck on sensing mode, you may notice that the sensing light is flashing. This indicates that the washer is trying to determine the load size and water level before proceeding with the wash cycle. The sensing mode is an important part of the wash cycle, as it ensures that the washer operates efficiently and effectively.

During the sensing mode, the washer performs a series of slow spins to determine the load size. It also checks the lid lock and lid switch to ensure that the washer door is properly closed and locked. The necessary amount of water for the wash cycle is determined by the sensing technology based on the load amount. Once the washer has completed the sensing mode, it will proceed with the wash cycle.

However, if your Whirlpool washer gets stuck on sensing mode and the light keeps flashing, it indicates that there may be an issue preventing the washer from progressing through the cycle. Now let's explore some solutions to get your washer back on track.

Solutions for a Whirlpool Washer Stuck in Sensing Mode

1. Reset Your Washer

One of the first steps you can take to resolve the issue is to reset your Whirlpool washer. To do this, simply unplug the washer from the power source and wait for a few minutes. This allows the washer to reset itself and clear any temporary issues. After a few minutes, plug the washer back in and see if the sensing mode issue has been resolved.

2. Review of Your Wash Settings

If resetting the washer doesn't solve the problem, the next step is to review your wash settings. Ensure that you have selected the correct settings for the wash cycle you want to run. Sometimes, incorrect settings can cause the sensing mode to be stuck. Cancel the current wash cycle and select the appropriate settings as instructed in the manual.

3. Identification of a Faulty Water Inlet Valve

If the issue persists, it may be due to a faulty water inlet valve. The water inlet valve is responsible for allowing water to flow into the washer during the wash cycle. If it is defective or clogged, it can prevent the washer from progressing through the cycle.

To test the water inlet valve, you can follow these steps:

  1. Turn off the water supply to the washer.
  2. Disconnect the water supply hoses from the back of the washer.
  3. Inspect the screens on the water inlet valve for any debris or blockages. Clean or replace the screens if necessary.
  4. Reconnect the water supply hoses and turn on the water supply.
  5. Start a new wash cycle and see if the washer progresses past the sensing mode.

If the washer still gets stuck on sensing mode after testing the water inlet valve, it may be necessary to replace the valve.

4. Possibility of a Defective Shift Actuator

Another potential cause of a Whirlpool washer stuck in sensing mode is a faulty shift actuator. The shift actuator is responsible for shifting the washer's gears and controlling the agitation and spin cycles. If it is defective, it can prevent the washer from moving past the sensing mode.

To replace the shift actuator, you can follow this guide:

  1. Unplug the washer from the power source and turn off the water supply.
  2. Remove the control panel and locate the shift actuator.
  3. Disconnect the wiring harness and remove the screws securing the actuator.
  4. Install the new shift actuator and reassemble the washer.
  5. Plug the washer back in and turn on the water supply.
  6. Start a new wash cycle and see if the sensing mode issue has been resolved.

5. Problem Related to a Faulty Drive Motor

A faulty drive motor can also cause a Whirlpool washer to get stuck on sensing mode. The drive motor is responsible for spinning the drum and agitating the clothes during the wash cycle. If it is defective, it can prevent the washer from progressing past the sensing mode.

If you suspect that the drive motor is the issue, it is recommended to contact a professional repair technician. They will be able to diagnose the problem and replace the drive motor if necessary.

6. Issue with the Main Control Board

Lastly, a problem with the main control board can also cause a Whirlpool washer to be stuck in sensing mode. The main control board is the brain of the washer, controlling all its functions. If it is faulty, it can prevent the washer from moving past the sensing mode.

To test the main control board, you can follow these steps:

  1. Unplug the washer from the power source.
  2. Remove the control panel and locate the main control board.
  3. Inspect the control board for any signs of damage or burnt components.
  4. Use a multimeter to test the control board for continuity and proper voltage.
  5. If the control board is defective, it will need to be replaced.

Activating Diagnostics Mode

If you're still experiencing issues with your Whirlpool washer stuck in sensing mode, activating the diagnostics mode can help identify the problem by displaying error codes. This can be a helpful step in troubleshooting the issue further.

Steps to Enter Diagnostics Mode

To enter diagnostics mode on your Whirlpool washer, follow these steps:

  1. Ensure the washer is in standby mode (plugged in with all indicators off).
  2. Press any three buttons in the following sequence within 8 seconds: 1. "2nd Rinse" or "Extra Rinse," 2. "Delay Start," 3. "2nd Rinse" or "Extra Rinse."
  3. The control panel will light up, and the washer will enter diagnostics mode.
  4. Use the cycle selector knob to navigate through the different diagnostic tests and error codes.

How to Adjust Your Washer's Calibration

During diagnostics mode, you can also adjust your washer's calibration. Calibration ensures that the washer accurately measures load size and water level. If your washer is not properly calibrated, it may get stuck on sensing mode.

Guide to Re-Calibration

To recalibrate your Whirlpool washer, follow these steps:

  1. Enter diagnostics mode as described above.
  2. Navigate to the calibration test.
  3. Press the start button to begin the calibration process.
  4. Follow the on-screen instructions to complete the calibration.

Recalibrating your washer can help resolve issues caused by settings going out of sync. It is recommended to run the recalibration cycle after replacing certain components, such as the water inlet valve or shift actuator.

FAQ

What do you do when your washing machine is stuck on its sensing?

When your washing machine is stuck on sensing, there are a few steps you can take to resolve the issue. First, try resetting the machine by unplugging it and waiting for a few minutes before plugging it back in. If that doesn't work, review the wash settings to ensure they are correct. If the problem persists, it may be due to a faulty water inlet valve, shift actuator, drive motor, or main control board. You can test these components and replace them if necessary. Activating diagnostics mode can also help identify the problem by displaying error codes.

How long does Whirlpool sensing take?

The length of time the Whirlpool sensing mode takes can vary depending on the specific model and the load size. Typically, the sensing mode lasts for a few minutes as the washer determines the load size and water level. If your Whirlpool washer is stuck on sensing mode for an extended period of time, it may indicate an issue that needs to be addressed.

Why is my Whirlpool auto load sensing washer not draining?

If your Whirlpool auto load sensing washer is not draining, it may be due to a clogged drain pump or hose. Check these components for any blockages or damage. It is also possible that there is a problem with the main control board or a faulty sensor. Inspect these components and replace them if necessary. If you're unable to resolve the issue, it is recommended to contact a professional repair technician for further assistance.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments