Is Your Maytag Bravos Washer Not Spinning? Find Solutions Here!

I've been there, staring at my Maytag Bravos washer, willing it to spin, but it just won't. It's a frustrating situation, as the laundry piles up and the inconvenience mounts. This issue can throw a wrench in my daily routine, especially when I'm in a hurry. It could be an unbalanced wash load or a faulty lid switch. Worse, it might be a damaged drive belt.

Key Takeaways:

  1. An unbalanced load or overloading can cause the Maytag Bravos washer not to spin, easily resolved by adjusting the load.

  2. A faulty lid switch, which acts as a safety device, can also prevent spinning.

If damaged, it needs replacement.

  1. A damaged drive belt disrupts the spin cycle, necessitating assessment and possible replacement.

Don't let a non-spinning washer derail your day. Read on to understand these issues better and learn how to resolve them.

Why Your Maytag Bravos Washer Won't Spin

If you've ever encountered the frustrating situation where your Maytag Bravos washer won't spin, you're not alone. This is a common issue that many homeowners face, and it can be caused by a variety of factors.

In this article, we'll explore the different reasons why your Maytag Bravos washing machine isn't spinning and provide you with some troubleshooting tips to help you get it back up and running.

![](https://washnowdry.com/wp-content/uploads/2023/10/Maytag-Bravos-drum.jpg)

Explaining Why Your Maytag Bravos Washing Machine Isn't Spinning

1. Incorrect Spin or Wash Setting on Maytag Bravos Washer

One of the first things you should check when your Maytag Bravos washer won't spin is the spin or wash setting. It's possible that you may have accidentally selected a setting that doesn't include the spin cycle.

Take a moment to double-check the settings and ensure that you've chosen the appropriate option for your laundry needs.

2. Inadequate Drainage

Another common reason for a Maytag Bravos washer not spinning is inadequate drainage. There are several factors that can contribute to poor drainage, including the presence of water in the tub, an obstructed drain filter, a faulty drain pump, or a twisted or blocked drainage hose.

a) Water in The Tub

If there is still water in the tub at the end of the wash cycle, it can prevent the washer from spinning. This could be due to a drainage issue or a malfunctioning sensor.

To address this, try running a drain cycle to remove any excess water.

If the problem persists, it may be necessary to check the drainage components for blockages or faults.

b) Obstructed Drain Filter

The drain filter is responsible for catching any debris or lint that may have been missed during the wash cycle. Over time, this filter can become clogged, hindering proper drainage.

To resolve this issue, locate the drain filter (usually located at the front or bottom of the machine) and clean it out.

This simple maintenance task can often solve the problem of a Maytag Bravos washer not spinning.

c) Faulty Drain Pump

The drain pump plays a crucial role in removing water from the tub during the spin cycle. If the pump is faulty or not functioning properly, it can lead to poor drainage and prevent the washer from spinning.

In this case, you may need to replace the drain pump to restore proper functionality to your Maytag Bravos washer.

d) Twisted or Blocked Drainage Hose

A twisted or blocked drainage hose can also impede the drainage process and cause your Maytag Bravos washer not to spin. Check the drainage hose for any kinks, twists, or blockages.

Straighten out any kinks and remove any obstructions to ensure proper water flow. This simple fix can often resolve the issue and get your washer spinning again.

3. Overloaded or Misbalanced Laundry

Overloading your Maytag Bravos washer or having an imbalanced load can also prevent the machine from spinning. When the load is too heavy or unevenly distributed, it can cause the washer to become off-balance and trigger safety mechanisms that prevent the spin cycle from starting. To resolve this issue, redistribute the laundry evenly in the tub and ensure that the load is within the recommended weight limit for your washer model.

4. Power Disruption

Sometimes, a simple power disruption can cause your Maytag Bravos washer not to spin.

If the washer is not receiving power or if there is a power outage, it will not be able to perform its functions properly. Check that the power cord is securely plugged into the outlet and that there are no issues with the electrical supply.

If necessary, reset the washer by unplugging it for a few minutes and then plugging it back in.

5. Broken Lid Switch

The lid switch is a safety device that prevents the washer from spinning or draining if the lid is open. If the lid switch is broken or malfunctioning, it can cause your Maytag Bravos washer not to spin.

To check the condition of the lid switch, inspect the plastic tab or lever that activates the switch when the lid is closed. If it's cracked or broken, it will need to be replaced.

Additionally, listen for the clicking sound the switch makes when the lid closes.

If there is no audible click, test the switch for continuity with a multimeter. If the reading is anything other than zero, the switch is faulty and requires replacement.

![](https://washnowdry.com/wp-content/uploads/2023/07/Maytag-Centennial-Washer.jpg)

6. Damaged Drive Belt

A damaged drive belt can also be the culprit behind a Maytag Bravos washer that won't spin. The drive belt is responsible for transferring power from the motor to the drum, allowing it to rotate during the spin cycle.

If the belt becomes loose, frayed, or torn, it can hinder the spinning action. To assess the condition of the drive belt, you'll need to remove the washer's back panel.

If the belt appears loose, it can be repositioned. However, if it's frayed or torn, it will need to be replaced.

Further Insight on a Maytag Washer that Won't Spin

In addition to the common causes mentioned above, there are a few other components that may be responsible for your Maytag Bravos washer not spinning. These include a malfunctioning transmission clutch, a defective actuator switch, a worn-out basket-drive hub kit, a non-functional door latch, and a compromised motor coupling.

7. Malfunctioning Transmission Clutch

The transmission clutch is an essential part of the washer's spin cycle. If the clutch is worn out or malfunctioning, it can prevent the tub from spinning properly.

In this case, it may be necessary to seek the assistance of a professional washing machine repair technician to replace the clutch and restore the spinning function.

8. Defective Actuator Switch

The actuator switch is responsible for engaging the spin cycle when the appropriate setting is selected. If the switch is defective or not functioning properly, it can result in a Maytag Bravos washer that won't spin.

Testing and replacing the actuator switch, if necessary, can help resolve this issue.

9. Worn Out Basket-Drive Hub Kit

The basket-drive hub kit allows the tub to spin during the spin cycle. Over time, the hub can wear out, leading to a Maytag Bravos washer that won't spin.

Inspecting and replacing the worn-out basket-drive hub kit can help restore proper spinning functionality.

10. Non-functional Door Latch

The door latch ensures that the door remains securely closed during operation. If the latch is non-functional or faulty, it can prevent the washer from spinning. Testing and replacing the door latch, if necessary, can resolve this issue.

11. Compromised Motor Coupling

The motor coupling connects the motor to the transmission in the washer. If the coupling is damaged or compromised, it can prevent the washer from spinning.

Inspecting and replacing the motor coupling, if necessary, can help resolve this issue.

Frequently Asked Questions

1. What Triggers a Maytag Washing Machine Not to Spin?

There are several factors that can cause a Maytag washing machine not to spin, including incorrect settings, poor drainage, overloaded or misbalanced laundry, power disruptions, broken lid switches, damaged drive belts, malfunctioning transmission clutches, defective actuator switches, worn-out basket-drive hub kits, non-functional door latches, and compromised motor couplings.

2. Why Isn't My Bravos Washer Spinning?

Your Bravos washer may not be spinning due to various reasons such as incorrect settings, drainage issues, overloaded or imbalanced loads, power disruptions, broken lid switches, damaged drive belts, malfunctioning transmission clutches, defective actuator switches, worn-out basket-drive hub kits, non-functional door latches, or compromised motor couplings.

3. Why Doesn't My Maytag Washer Drain and Spin?

If your Maytag washer is not draining and spinning, it could be due to inadequate drainage, a faulty drain pump, a clogged drainage hose, or standing water in the tub. Checking for these issues and addressing them accordingly can help resolve the problem.

Concluding Thoughts On Maytag Bravos Washer Not Spinning!

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments