Is Your LG Washing Machine Filter Leaking? Here’s How to Fix It!

Ever since I've owned my LG washing machine, it's been a reliable stalwart in my laundry routine. That's why the first time I noticed water pooling beneath my LG washer, my heart sank. The culprit? A filter leaking from my machine. As it turns out, this was a common problem with a simple solution.

Key Takeaways:

  1. Filter Problems: Misalignment or improper installation of the filter can cause leakage. It's essential to line up the notch at the filter's bottom with the trim tab in the filter housing.

  2. Regular Maintenance: A dirty, clogged filter cannot leak, but it can cause other leakage issues. Regularly cleaning your LG washing machine filter - about once every four weeks - can help prevent clogs and potential leaks.

  3. Damage Control: Any visible damage to the filter such as cracks or a loose cap should be addressed immediately to avoid further leaks and potential problems.

Remember, a leaking washing machine is more than just a nuisance; it's a potential water waste and floor hazard.

Stay tuned for a deeper dive into this topic that could save you time, money, and soggy socks!

Why does the LG Washer leak from the bottom filter?

A common issue with LG washing machines is leakage from the bottom filter. This can indeed be a frustrating problem, but comprehending the potential causes can aid in effectively addressing it.

Here, we will delve into the three primary reasons why an LG washing machine filter may leak.

Where should the filter be placed?

One possible cause of a leaking LG washing machine filter is incorrect filter placement. The filter is designed to fit securely in the filter housing, but if it is not installed properly, it can lead to leaks.

From my knowledge, I've seen that there is a small notch at the bottom of the filter that should be lined up with the trim tab inside the filter housing.

Failing to align these correctly can result in a faulty seal and water leakage.

To ensure proper filter placement, follow these steps:

  1. Turn off the washing machine and unplug it from the power source.

  2. Locate the filter housing, usually located at the front exterior of the machine.

  3. Remove the filter by gently twisting it counterclockwise.

  4. Inspect the filter and the filter housing for any dirt or debris.

  5. Align the notch at the bottom of the filter with the trim tab inside the filter housing.

  6. Push and rotate the filter clockwise until it is tightly locked in place.

  7. Plug the washing machine back in and turn it on to check for any leaks.

Is the seal damaged or polluted?

Another potential cause of a leaking LG washing machine filter is a damaged or polluted seal. Over time, the seal on the filter can become contaminated with grit and fine particles, or it may even get cut by sharp debris.

This can weaken the lock between the filter and its housing, resulting in water leakage.

To address this issue, you may need to replace the seal.

Here's how you can do it:

  1. Turn off the washing machine and unplug it from the power source.

  2. Remove the filter by twisting it counterclockwise.

  3. Inspect the seal for any signs of damage or contamination.

  4. If the seal is damaged or dirty, carefully remove it from the filter.

  5. Clean the filter housing and the seal thoroughly to remove any debris.

  6. Install a new seal onto the filter, making sure it is securely in place.

  7. Push and rotate the filter clockwise until it is tightly locked in the filter housing.

  8. Plug the washing machine back in and turn it on to check for any leaks.

What is a broken coin catcher?

A broken coin catcher can also cause leaks from the bottom filter of an LG washing machine. The coin catcher, which is the cap of the filter, can crack if excessive force is applied when removing a stuck filter.

This can result in water seeping out during the washing cycle.

If you suspect a broken coin catcher, follow these steps to address the issue:

  1. Turn off the washing machine and unplug it from the power source.

  2. Remove the filter by twisting it counterclockwise.

  3. Inspect the coin catcher for any cracks or damage.

  4. If the coin catcher is broken, it will need to be replaced.

  5. Contact LG customer support or consult the user manual for guidance on obtaining a replacement coin catcher.

  6. Install the new coin catcher onto the filter, ensuring it is securely in place.

  7. Push and rotate the filter clockwise until it is tightly locked in the filter housing.

  8. Plug the washing machine back in and turn it on to check for any leaks.

In the next section, we will address some common questions related to LG washing machine filter leaks.

Can a faulty Washing Machine filter result in a leak?

Yes, a faulty washing machine filter can result in a leak.

The filter plays a crucial role in preventing debris and foreign objects from entering the drain pump and causing blockages. If the filter is not securely installed, has a damaged seal, or a cracked coin catcher, it can lead to water leakage from the bottom of the washing machine.

Therefore, it is important to regularly inspect and maintain the filter to ensure its proper functioning.

Does the LG Washing Machine leak after filter cleaning?

No, the LG washing machine should not leak after filter cleaning if the filter is properly installed.

Cleaning the filter is an essential maintenance task to prevent clogs and potential leaks. However, if the washing machine starts leaking after filter cleaning, it may indicate that the filter was not installed securely.

In such cases, reinstalling the filter by following the correct installation procedure can often resolve the issue.

Can a grimy filter continue to leak?

A grimy filter itself cannot leak, but if it is clogged with dirt and debris, it can cause leakage issues. A clogged filter can obstruct the flow of water, leading to pressure buildup and potential leaks.

Regularly cleaning and maintaining the filter is important to prevent clogs and ensure the proper functioning of the washing machine. If you notice any signs of damage to the filter, such as cracks or a loose cap, it is important to replace it to avoid leaks and other problems.

FAQ

Why is my washing machine leaking from the filter?

If your washing machine is leaking from the filter, it may be due to incorrect filter placement, a damaged or polluted seal, or a broken coin catcher. Ensuring proper filter installation, replacing damaged seals, and fixing broken coin catchers can help resolve this issue.

Why is my LG washer drain pump constantly leaking?

A constantly leaking LG washer drain pump may indicate a problem with the filter. Incorrect filter placement, a damaged or polluted seal, or a broken coin catcher can cause water leakage from the drain pump.

Addressing these issues can help resolve the constant leaking.

Why is my LG washer leaking during the spin cycle?

If your LG washer is leaking during the spin cycle, it may be due to a faulty filter. Incorrect filter placement, a damaged or polluted seal, or a broken coin catcher can result in water leakage during the spin cycle.

Properly installing the filter, replacing damaged seals, or fixing broken coin catchers can help resolve this issue.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments