Kenmore Washer Shaking Violently on Spin Cycle? Quick Fixes!

Have you ever experienced the unsettling sensation of your Kenmore washer shaking violently during the spin cycle? If so, you're not alone.

Many Kenmore washer owners have encountered this issue, and it can be a cause for concern.

In this article, we will explore the possible reasons behind this extreme shaking and provide some solutions to help you resolve the problem.

Key Takeaways:

  1. A Kenmore washer shaking violently during the spin cycle could be due to faulty suspension rods, damaged leveling legs, or a defective shock absorber.

  2. Regular inspections for signs of wear and tear, including rust on counter-balance springs and squeaking ball bearings, can prevent this issue.

  3. Solutions range from adjusting the leveling legs to replacing the shock absorber or ball bearings if they are faulty.

This may sound like a domestic horror story, but don't worry, this article holds the key to taming your tumultuous Kenmore washer.

Kenmore series 500 washer shaking violently on spin cycle

In this section, we'll go over all the reasons why your kenmore washer is shaking during the spin cycle. Lets start:

1. Defective Shock Absorber

One possible culprit behind the violent shaking of your Kenmore washer during the spin cycle is a defective shock absorber. The shock absorbers in your washer play a crucial role in dampening vibrations and stabilizing the tub.

Over time, these components can wear out or become damaged, leading to excessive shaking during the spin cycle.

Inspecting the shock absorbers is the first step in diagnosing this issue. Check for any signs of damage or oil leakage.

Additionally, ensure that there is resistance when you push or pull on the shock absorber.

If you notice any abnormalities, such as a cracked or broken shock absorber, it is likely contributing to the violent shaking. Replacing the faulty shock absorber should help alleviate the issue.

2. Absent or Damaged Rubber in Leveling Legs

Another potential cause for the violent shaking of your Kenmore washer is the absence or damage of rubber in the leveling legs. The leveling legs are designed to keep the washer balanced and stable during operation.

If the rubber feet on these legs are missing or damaged, it can lead to an imbalance and result in excessive shaking.

To check for damaged or missing rubber in the leveling legs, ensure that the legs are balanced and inspect the rubber feet for any signs of wear or tear. If you find any damage, it is recommended to replace the rubber feet to restore stability to your washer.

3. Impaired Counterbalance Springs

Impaired counterbalance springs can also contribute to the violent shaking of your Kenmore washer during the spin cycle. Counterbalance springs are responsible for offsetting the weight of the tub, ensuring smooth and balanced operation.

Over time, these springs can become stretched out, damaged, or rusty, leading to an imbalance and excessive shaking.

Inspect the counterbalance springs for any signs of rust, damage, or being stretched out. If you notice any abnormalities, it is advisable to replace the springs to restore proper balance to your washer.

4. Fractured Spider Support Arm or Assembly

A fractured spider support arm or assembly can also be a potential cause of the violent shaking in your Kenmore washer. The spider support arm is responsible for supporting the inner tub and maintaining its stability during the spin cycle.

If this component is broken or damaged, it can cause the tub to bounce erratically, resulting in excessive shaking.

To check for a broken spider support arm, spin the inner tub by hand and listen for any clicking noises. Additionally, inspect the outer tub for any signs of damage or bouncing of the inner tub.

If you suspect a broken spider support arm, it is recommended to replace it to restore stability to your washer.

How do deteriorating ball bearings affect your washer's performance?

Deteriorating ball bearings can also contribute to the violent shaking of your Kenmore washer. Ball bearings are responsible for facilitating smooth rotation of the tub.

Over time, these bearings can wear out, leading to increased friction and vibration during the spin cycle.

To check for faulty ball bearings, manually inspect them for any squeaking sounds. Additionally, check for any leaks or water getting into the bearings.

If you suspect faulty ball bearings, it is advisable to replace them to restore smooth operation to your washer.

6. Malfunctioning Suspension Rod

A malfunctioning suspension rod can also be a potential cause of the violent shaking in your Kenmore washer. Suspension rods are designed to support the tub and absorb vibrations during the spin cycle.

If these rods are faulty or worn out, they may not effectively dampen the vibrations, resulting in excessive shaking.

To check for faulty suspension rods, push down on the tub and ensure that it bounces smoothly and not erratically. If you notice erratic bouncing, it is likely that the suspension rods need to be replaced to restore stability to your washer.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments