Is Your Kenmore Washer Lid Lock Light Flashing? Here are 8 Reason

If you've noticed that the lid lock light on your Kenmore washer is flashing, don't worry - you're not alone. Many Kenmore washer owners have experienced this issue, and there can be several reasons why it's happening. In this article, we'll explore the possible causes of a flashing lid lock light and discuss the remedies to help you get your washer back up and running smoothly.

Key Takeaways:

  1. The lid lock light flashing on a Kenmore washer signals a potential problem that could range from a simple obstruction to an electrical fault.

  2. Quick fixes like unplugging the machine or pressing certain button combinations may offer temporary relief, but it's crucial to ascertain the actual cause.

  3. Addressing this issue requires a methodical approach – checking and cleaning the lid lock and striker, ensuring they're aligned, or even replacing components if needed.

Why Is My Washing Machine Lock Flashing?

Here are the top 8 reasons why your washers lock is flashing:

1. Why Machines Need Resets

One of the first things you can try when you see the lid lock light flashing is to perform a machine reset. This simple step can often resolve minor issues and reset the washer's internal settings.

To do a reset, simply unplug the washer from the power source and leave it unplugged for about 10 minutes.

This allows the machine to completely power down and reset itself. After 10 minutes, plug the washer back in and see if the lid lock light is still flashing.

If the reset doesn't fix the issue, don't worry. There are several other possible causes that we'll explore next.

2. Misplacement of the Top Lid

Sometimes, the lid lock light may flash if the top lid of the washer is not properly closed or aligned.

This can prevent the lid lock from engaging and cause the light to blink. Check to make sure that the lid is closed securely and that there are no obstructions preventing it from closing fully.

If you find any interference, remove it and try closing the lid again.

3. Lid Lock Striker Disruption or Misalignment

Another possible cause of the lid lock light flashing is a disruption or misalignment of the lid lock striker. The lid lock striker is a small plastic piece that protrudes from the washer and engages with the lid lock mechanism.

If it becomes misaligned or damaged, the lid lock may not engage properly, resulting in the flashing light.

To fix this issue, you can try realigning the lid lock striker with the lid lock mechanism.

Gently push or adjust the striker until it lines up with the lock. Make sure it is secure and that there is proper contact between the striker and the lock.

4. Accumulation of Lint or Dirt around the Lid Lock and Striker

Over time, lint, dirt, and other debris can accumulate around the lid lock and striker, hindering their proper functioning.

This can prevent the lid lock from engaging and cause the light to flash. To resolve this issue, you'll need to clean the area around the lid lock and striker.

Start by unplugging the washer and opening the lid. Use a soft cloth or brush to gently remove any lint or dirt that has built up around the lock and striker.

Be careful not to damage any components while cleaning. Once you've cleaned the area, close the lid and plug the washer back in to see if the flashing light persists.

5. The Washer is Running a Wash Cycle

In some cases, the lid lock light may flash simply because the washer is engaged in a current wash cycle or process.

This is normal behavior for some Kenmore washers, and the light will stop flashing once the cycle is completed or the process is finished. If you suspect this may be the case, wait for the current cycle to finish and see if the flashing light goes away.

6. Damage to the Lid Lock Switch

If none of the previous solutions have resolved the issue, it's possible that the lid lock switch itself is damaged or faulty. The lid lock switch is a small component located near the lid lock mechanism, and it is responsible for detecting whether the lid is closed properly.

If the switch is damaged, it may not send the signal to the washer to engage the lock, resulting in the flashing light.

To fix this issue, you may need to replace the lid lock switch.

Consult your Kenmore washer's manual or contact a professional appliance repair technician for guidance on how to replace the switch.

7. Defective Shift Actuator

Another potential cause of the lid lock light flashing is a defective shift actuator. The shift actuator is responsible for shifting the washer's transmission between different cycles.

If it is not functioning correctly, it may cause the lid lock light to flash.

If you suspect that the shift actuator is the issue, you may need to replace it. Consult your Kenmore washer's manual or contact a professional for assistance with replacing the shift actuator.

8. Control Panel Malfunction (Rare Occurrence)

While rare, a control panel malfunction can also cause the lid lock light to flash.

If none of the previous solutions have resolved the issue, it's possible that there is a fault in the control panel. In this case, it's best to contact a professional appliance repair technician to diagnose and fix the issue.

What Are The Remedies For A Blinking Lid Lock Light On A Kenmore Washer?

Now that we've discussed the possible causes of a flashing lid lock light on a Kenmore washer, let's explore the remedies to help you resolve the issue. Here are the steps you can take to fix the problem:

  1. Reset the washer: Unplug the washer from the power source and leave it unplugged for about 10 minutes. This will allow the machine to reset itself. Plug it back in and check if the lid lock light is still flashing.

  2. Ensure proper lid closure: Make sure the top lid of the washer is closed securely and that there are no obstructions preventing it from closing fully.

  3. Realign the lid lock striker: Check the lid lock striker and realign it with the lid lock mechanism if necessary. Ensure there is proper contact between the striker and the lock.

  4. Clean the lid lock and striker: Remove any lint or dirt that has accumulated around the lid lock and striker. Use a soft cloth or brush to gently clean the area.

  5. Wait for the current cycle to finish: If the washer is engaged in a wash cycle or process, wait for it to finish and see if the flashing light goes away.

  6. Replace the lid lock switch: If the previous solutions haven't resolved the issue, you may need to replace the lid lock switch. Consult your Kenmore washer's manual or contact a professional for guidance.

  7. Replace the shift actuator: If you suspect that the shift actuator is the problem, consult your Kenmore washer's manual or contact a professional to replace it.

  8. Contact a professional for control panel issues: If none of the remedies have fixed the issue, it's best to contact a professional appliance repair technician to diagnose and fix any control panel malfunctions.

Wrapping Up

Experiencing a flashing lid lock light on your Kenmore washer can be frustrating, but with the solutions we've discussed, you should be able to resolve the issue. Remember to try the remedies in the order outlined and consult your Kenmore washer's manual or a professional if you need further assistance.

FAQ

Why is my washer blinking the lid lock?

A blinking lid lock light on your washer can indicate several issues. Some possible causes include a misaligned lock striker, lint or detergent buildup hindering the locking of the lid, an open lid switch, a faulty control board, and a faulty actuator motor.

It's important to address the problem to ensure the proper functioning of your Kenmore washer. Follow the troubleshooting steps we've discussed in this article to fix the issue.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments