Kenmore Washer Hums But Doesn't Spin

Kenmore Washer Hums But Doesn’t Spin? Find the Solution Here!

Imagine this: You're starting your day, ready to tackle your chores, and as you load your Kenmore washer, you hear an unusual humming sound. But, surprisingly, your washer does not spin. You're left with a pile of wet, soapy clothes and a disrupted routine. What a nightmare! As trivial as it might seem, a washer that hums but does not spin can throw a wrench in your daily life, delaying chores and causing unnecessary stress.

Don't despair. This article holds the answers you need to tackle this issue head-on.

Key Takeaways:

  1. Common Causes: From a material caught in the pump to a faulty motor or a broken lid switch, several reasons could be behind your Kenmore washer humming but not spinning.
  2. Signs & Symptoms: Recognizing the signs – such as the washer humming or buzzing but failing to spin – can help you diagnose the issue promptly.
  3. The Solution: Depending on the cause, resolving the issue might involve unclogging the water pump, replacing worn-out motor components, or fixing a broken lid switch. Remember, some issues may require professional assistance.

Ultimately, understanding the problem underlying your about why Kenmore washer humming but not spinning empowers you to either fix it yourself or seek the right professional help.

Why is my Kenmore washer only humming and not spinning?

If you're experiencing the frustrating issue of your Kenmore washer humming but not spinning, don't worry, you're not alone. This problem can be caused by a few different factors, including a blockage in the pump, issues with the washer's motor, or a malfunctioning lid switch. In this section, we'll explore each of these possibilities, provide some troubleshooting tips, and offer guidance on when it may be necessary to seek professional assistance.

1. Blockage in the pump due to a trapped object

One of the most common causes of a Kenmore washer humming but not spinning is a blockage in the pump. The pump is responsible for removing water from the washer during the draining process. Sometimes, objects such as coins, pens, hairpins, or even socks can get trapped in the pump, preventing it from functioning properly.

To check for a blockage in the pump, you'll need to access it. Start by unplugging the washer and locating the pump, which is typically located at the bottom of the machine. Once you've found the pump, you can remove any visible objects or debris that may be causing the blockage.

If you're unable to find any visible blockages, you may need to detach the pump from the washer to inspect it more thoroughly. Refer to your user manual or consult online resources for instructions specific to your Kenmore washer model.

2. Issues with the washer's motor

Another possible reason for your Kenmore washer humming but not spinning is a problem with the motor. The motor is responsible for driving the drum's spinning motion. If the motor is faulty or worn out, it may still produce a humming noise but fail to engage the drum.

To diagnose motor issues, it's best to unplug the washer and visually inspect the motor for any visible signs of damage or wear. Look for frayed wires, burnt smells, or any other indicators that the motor may be malfunctioning. If you're not comfortable doing this yourself, it's best to seek the assistance of a professional technician who can evaluate and repair the motor if necessary.

In some cases, worn-out carbon brushes in the motor can also cause the washer to hum but not spin. These brushes can become worn down over time and may need to be replaced. Again, consulting a professional technician is recommended for this type of repair.

3. The lid switch could be malfunctioning

A malfunctioning lid switch can also be a culprit behind your Kenmore washer only humming and not spinning. The lid switch is a safety feature that prevents the washer from running if the lid is open. If the switch is broken or not functioning properly, it can prevent the washer from spinning or agitating.

To check the lid switch, start by unplugging the washer and locating the switch, which is typically located near the door or lid of the machine. Inspect the switch for any visible signs of damage or wear. If the switch appears to be broken or defective, it will need to be replaced.

Replacing the lid switch can be done by following the instructions provided in your user manual or by consulting online resources. However, if you're not comfortable with this type of repair, it's best to contact a professional technician for assistance.

Conclusion

Dealing with a Kenmore washer that only hums and doesn't spin can be frustrating, but with a little troubleshooting, you may be able to identify and resolve the issue. Start by checking for any blockages in the pump and removing any trapped objects. If that doesn't solve the problem, inspect the motor for any visible signs of damage or wear. Finally, check the lid switch for any defects and consider replacing it if necessary.

FAQ

Why is my washing machine making a humming sound and not spinning?

If your washing machine is making a humming sound but not spinning, there could be a few different reasons for this issue. It could be due to a blockage in the pump, problems with the motor, or a malfunctioning lid switch. We recommend checking for any blockages in the pump, inspecting the motor for visible signs of damage or wear, and checking the lid switch for any defects.

Why is my Kenmore washer making a humming noise?

If your Kenmore washer is making a humming noise, it could be due to a blockage in the pump, issues with the motor, or a malfunctioning lid switch. We recommend checking for any blockages in the pump, inspecting the motor for visible signs of damage or wear, and checking the lid switch for any defects.

Why won't my Kenmore washer spin and only makes clicking sounds?

If your Kenmore washer won't spin and only makes clicking sounds, it could be due to a blockage in the pump, problems with the motor, or a malfunctioning lid switch. I recommend checking for any blockages in the pump, inspecting the motor for visible signs of damage or wear, and checking the lid switch for any defects.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments