How to Test Water Inlet Valves on a Maytag Bravos Washer

How to Test Water Inlet Valves on a Maytag Bravos Washer

I've had my fair share of laundry hiccups and I know how crucial a properly functioning Maytag Bravos washer is to my daily life. When my washer stopped filling, I learned how to test water inlet valves and it was a game-changer. With a multimeter and some diagnostic know-how, I checked the electrical connections, activated the valves in manual test mode, and scrutinized the resistance of the valve coils. When I discovered that the resistance readings were off, I knew the valve assembly needed replacing. The whole ordeal taught me the importance of maintaining my washer and certainly saved me a hefty repair bill.

Key Takeaways:

  1. Testing water inlet valves requires checking the electrical connections, activating the manual test mode, and measuring valve coil resistance.
  2. Detecting irregular resistance readings can indicate a faulty valve assembly that needs replacing.
  3. Regular maintenance of your washer, including valve testing, can lead to significant savings on repair costs.

Dive deeper into this topic and equip yourself with practical knowledge that could save your day (and your wallet)!

Knowing Your Maytag Bravos Washer

The Maytag Bravos washer is a popular choice for many households due to its durability and efficiency. It comes in various models, but the testing process we'll discuss applies to most Maytag Bravos series washers, including the Maytag Bravos MVWX655DW0 XL washer.

Water Inlet Valves

Water inlet valves are crucial components of your washing machine that control the flow of water into the tub during different cycles. They are responsible for allowing both hot and cold water to enter the washer. If these valves are faulty or malfunctioning, it can lead to issues such as the washer not filling or even overflowing.

Step-by-Step Guide on Testing Water Inlet Valves on a Maytag Bravos Washer

Now that we have a basic understanding of water inlet valves, let's proceed with the step-by-step guide on how to test them on your Maytag Bravos washer.

Initial Preparations for the Test

  1. Safety first: Before starting any testing or repair procedures, ensure that your washer is unplugged and disconnected from any power source to prevent any accidents.
  2. Accessing the control panel: Open the washer's control panel by removing any screws or clips that may be securing it in place. Refer to the washer's user manual or online resources for specific instructions on accessing the control panel for your model.
  3. Locating the water inlet valves: Once you have access to the control panel, locate the water inlet valves. These valves are usually located at the back of the washer, near the top, and are connected to the water supply hoses.

Conducting the Water Valve Testing

  1. Checking electrical connections: Start by inspecting the electrical connections to the water inlet valves. Ensure that the connections are secure and free from any damage or corrosion.
  2. Entering manual test mode: To test the water inlet valves, you'll need to enter the manual test mode on your Maytag Bravos washer. The process may vary slightly depending on the model, so refer to the user manual for specific instructions. In general, you can enter the manual test mode by pressing a combination of buttons on the control panel.
  3. Activating the valves: Once in the manual test mode, you'll be able to activate and deactivate the selected valve for testing. Follow the instructions on the control panel to activate the hot and cold water inlet valves individually.
  4. Checking valve activation: Observe the water inlet valves during the test. If one or both valves fail to turn on when activated, it indicates a problem with the valves or their associated components.
  5. Inspecting solenoid valves and harness connection: If you notice that one or both valves are not turning on during the test, you'll need to check the solenoid valves and the harness connection. Ensure that the solenoid valves are not blocked or clogged and that the harness connection is secure.

Interpreting the Results of the Test

  1. Resistance test: To further diagnose the issue, you can perform a resistance test on the valve coils. Using a multimeter, measure the resistance of the valve coils using the specified pin-outs. In general, the resistance of the valve coils should be within the range of 890-1.3k Ω. If the resistance readings are outside of this range, it indicates a faulty valve.
  2. Replacing the faulty valve: If the resistance readings are outside the specified range, it's recommended to replace the entire valve assembly for the faulty valve. You can order a manufacturer-approved Maytag Bravos washer water inlet valve online or from an appliance parts store.
  3. Replacing the main control board: If the resistance readings are within the specified range, it indicates that the valve coils are functioning correctly. In this case, the issue may lie with the main control board. It's recommended to replace the main control board and calibrate the washer to ensure proper functioning.
  4. Verifying the repair: After making any repairs or replacements, it's essential to run an automatic test in diagnostic mode to verify the effectiveness of the repair. This test will help ensure that the water inlet valves are now functioning correctly and that the issue has been resolved.
  5. ![](https://washnowdry.com/wp-content/uploads/2023/07/maytag-inlet-valve.jpg)

Handling Faulty Water Inlet Valves

Unfortunately, water inlet valves can sometimes become faulty and require repair or replacement. Here's a guide on how to handle faulty water inlet valves on your Maytag Bravos washer.

How to Repair Water Inlet Valve on Washing Machine

If you're handy and comfortable with repairing appliances, you can attempt to repair the water inlet valve on your washing machine. However, it's essential to note that this process requires technical knowledge and expertise. If you're not confident in your abilities, it's best to seek professional assistance to avoid causing further damage.

The Process of Removing Water Inlet Valve on Washing Machine

To remove the water inlet valve on your washing machine, follow these steps:

  1. Unplug the washer: Always start by unplugging the washer and disconnecting it from any power source to ensure your safety.
  2. Accessing the valve: Remove the control panel and locate the water inlet valve at the back of the washer. Disconnect the water supply hoses and electrical connections attached to the valve.
  3. Removing the valve: Depending on the model, you may need to remove additional components or screws to access the valve. Once you have clear access, remove the valve from its mounting bracket or housing.
  4. Installing the new valve: Install the new water inlet valve by following the reverse steps of the removal process. Ensure that all connections are secure and properly tightened.

Washer Water Inlet Valve Replacement Steps

If you prefer to replace the water inlet valve yourself, here are the general steps to follow:

  1. Order the correct valve: Ensure that you order a manufacturer-approved Maytag Bravos washer water inlet valve that is compatible with your specific model.
  2. Unplug the washer: As always, start by unplugging the washer and disconnecting it from any power source.
  3. Access the valve: Remove the control panel and locate the water inlet valve at the back of the washer. Disconnect the water supply hoses and electrical connections attached to the valve.
  4. Remove the old valve: Depending on the model, you may need to remove additional components or screws to access the valve. Once you have clear access, remove the old valve from its mounting bracket or housing.
  5. Install the new valve: Install the new water inlet valve by following the reverse steps of the removal process. Ensure that all connections are secure and properly tightened.
  6. Test the new valve: After installing the new valve, run an automatic test in diagnostic mode to verify that the replacement was successful and that the water inlet valve is functioning correctly.

Cost Implications

When dealing with appliance repairs, it's essential to consider the cost implications. Here are some factors to keep in mind regarding the cost of water inlet valves for your Maytag Bravos washer.

Washing Machine Water Inlet Valve Price

The price of a washing machine water inlet valve can vary depending on various factors such as the model, brand, and where you purchase it. Generally, the cost of a water inlet valve can range from $20 to $100.

The Price of Water Inlet Valve Maytag Washer

For a Maytag Bravos washer, the price of a water inlet valve can vary. It's recommended to check with authorized Maytag dealers or online retailers for the most accurate and up-to-date pricing information.

Frequently Asked Questions

Here are some frequently asked questions about testing water inlet valves on a Maytag Bravos washer.

How Do I Know if My Washing Machine Water Inlet Valve is Bad?

If your washing machine is not filling with water or is overflowing, it could be an indication of a bad water inlet valve. Testing the water inlet valves using the step-by-step guide provided in this article will help you determine if the valves are the cause of the issue.

What is the Working Voltage of the Inlet Valve of the Top Loading Washing Machine?

The working voltage of the inlet valve for a top-loading washing machine, such as the Maytag Bravos washer, is typically 120 volts. However, it's essential to refer to the specific model's user manual or technical specifications for accurate information regarding the working voltage.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments