How to Test the Control Board on Maytag Bravos Washer

How to Test the Control Board on Maytag Bravos Washer

As an owner of a Maytag Bravos washer, I've found it indispensable. However, issues can arise, particularly with the control board, affecting the washer's performance. That's why learning how to test the control board is crucial. It can influence my washer's functionality and, by extension, my daily life. The process involves unplugging the washer, accessing the main control, and using a voltmeter to check for voltage. Whether it's the Maytag Bravos MVWX655DW0 XL or another model, it's a valuable skill to have.

Key Takeaways:

  1. Testing the control board is a necessary step to diagnose issues with Maytag Bravos washers.
  2. The process includes checking for proper voltage and ensuring all connectors are inserted correctly.
  3. If testing reveals problems, replacing the faulty control board can resolve the issues.

This guide might be the solution to your washer troubles. Keep reading to discover how you can get your Maytag Bravos washer running smoothly again.

Control Board Testing Process

The control board in your Maytag Bravos washer is responsible for processing commands from the user interface, sending electricity to different components at the right time, and interpreting information from sensors. It plays a crucial role in the overall functioning of the washer. Therefore, if you're experiencing problems such as the washer not starting or the control panel not responding, it's important to test the control board to determine if it is the root cause of the issue.

Steps to Test the Control Board on a Maytag Bravos Washer

Inspection of Maytag Bravos Washer Control Board

Before diving into the testing process, it's essential to perform a visual inspection of the control board. Make sure there are no loose connections or obvious signs of damage. Check for any corrosion on the connectors, as this can often lead to control board failure. If you notice any issues during the inspection, it may indicate that the control board needs to be replaced.

Troubleshoot Control Board Issues

Once you have completed the visual inspection, it's time to move on to troubleshooting any control board issues. Follow these steps to test the control board on your Maytag Bravos washer:

  1. Unplug the washer: Before starting any testing procedures, ensure that the washer is unplugged to prevent any electrical accidents.

  2. Remove the console: To access the main control board, you'll need to remove the console. Refer to your Maytag Bravos washer's specific tech sheet for instructions on how to remove the console.

  3. Verify connectors: Once the console is removed, verify that all connectors are inserted properly into the main control board. Loose or improperly connected connectors can result in control board malfunctions.

  4. Check for voltage: Use a voltmeter to check for voltage at the main control board. It is assumed that there is proper voltage at the outlet for this test. If 120 VAC is not present, check the power cord for continuity.

  5. Check the "Diagnostic L.E.D": While testing for voltage, also check if the "Diagnostic L.E.D" is off or on. This LED indicates the presence of +5VDC supply. Refer to Figure 2 for the location of the "Diagnostic L.E.D."

  6. Check for +13VDC: If the +5VDC supply is present, proceed to check for the presence of +13VDC. If the +13VDC voltage is missing, it suggests a possible issue with the shifter assembly. Consider checking the shifter assembly for any problems.

  7. Check for shorts: If the +13VDC voltage is still missing after checking the shifter assembly, it's time to inspect the harness between the shifter assembly and the main control for possible shorts. Ensure that the harness and connections are in good condition.

  8. Replace main control: If all previous steps do not resolve the issue, it is likely that the main control (motherboard) has malfunctioned and needs to be replaced. Consider ordering a manufacturer-approved Maytag Bravos washing machine control board from a reliable source, such as Amazon.

  9. Calibrate and test: After replacing the main control board, it is important to calibrate the washing machine and run an Automatic Test to ensure that everything is functioning properly.

FAQ Section

How do I know if my washing machine control board is bad?

There are several signs that may indicate a bad control board in your washing machine. If your Maytag Bravos washer is experiencing issues such as not starting, unresponsive control panel, or erratic behavior, it could be a sign of a faulty control board. Additionally, if you have ruled out other possible causes of the problem, such as power supply issues or faulty wiring, testing the control board can help confirm if it is indeed the source of the problem.

How do I reset my Maytag washer control board?

To reset the control board on your Maytag washer, you can follow these steps:

  1. Unplug the washer: Start by unplugging the washer from the power source. This will ensure your safety during the reset process.

  2. Wait for a few minutes: Leave the washer unplugged for a few minutes to allow the control board to fully reset.

  3. Plug the washer back in: After waiting for a few minutes, plug the washer back into the power source.

  4. Test the washer: Once the washer is plugged back in, test it to see if the control board has been successfully reset. Check if the previous issues have been resolved and if the washer is functioning properly.

Understanding Common Maytag Bravos Washer Control Board Problems

The control board in your Maytag Bravos washer is a critical component, and like any electronic device, it can experience problems over time. Understanding common control board problems can help you diagnose and address issues more effectively. Here are some common control board problems you may encounter with your Maytag Bravos washer:

Maytag Bravos XL Washer Control Panel Issues

The control panel of your Maytag Bravos XL washer is the interface between you and the washer. It consists of a thin panel of switches located behind the control console. Sometimes, you may encounter issues such as stuck switches or incorrect registration of the cycle knob. These problems can result in the control panel not responding or the washer not starting. If you experience control panel issues, testing the control board can help identify if it is the cause of the problem.

Maytag Washer Troubleshooting Manual

When troubleshooting issues with your Maytag Bravos washer, referring to the Maytag Washer Troubleshooting Manual can provide valuable guidance. The manual contains information on common problems, error codes, and step-by-step instructions on how to address them.

Handling Maytag Bravos XL Washer Control Board Replacement

If testing the control board confirms that it is indeed the cause of the problem, replacing the control board may be necessary. When handling the replacement process, it is essential to follow the manufacturer's instructions and ensure that you have the appropriate knowledge and tools for the job. If you are unsure or uncomfortable with replacing the control board yourself, it is recommended to seek professional assistance to avoid any further damage or safety hazards.

What to do when Maytag Bravos XL Washer Turns On but Won't Start

If your Maytag Bravos XL washer turns on but won't start, it can be frustrating. This issue can be caused by various factors, including a faulty control board. Testing the control board can help determine if it is the cause of the problem.

Dealing with Maytag Washing Machine No Power No Lights ProblemDealing with Maytag Washing Machinene has no power and no lights, it can be an indication of a power supply issue or a faulty control board. Before testing the control board, ensure that the power outlet is functioning correctly and that there are no tripped circuit breakers. If the power supply is not the problem, testing the control board can help identify if it is causing the lack of power and lights. If the control board is found to be faulty, replacing it is recommended.

Maytag Commercial Technology Washer Troubleshooting Guide

Maytag commercial technology washers are known for their durability and performance. However, like any appliance, they can experience issues from time to time. If you own a Maytag commercial technology washer and encounter problems, referring to the Maytag commercial technology washer troubleshooting guide can provide valuable assistance. The guide contains specific information on troubleshooting common issues related to the control board and other components of the washer.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments