How to Open or Turn On the Water Valve on Washing Machine

How to Open or Turn On the Water Valve on Washing Machine

Imagine this - it's laundry day and you're ready to tackle that mountain of clothes. You load your washing machine, press start, but no water fills the drum. What's going on? Is your day doomed? Not if it's a simple issue with the water valve on your washing machine. Being able to open or turn on this valve can save your day, and your clothes. It's crucial to your washing machine's function - without it, there's no water for your wash. Frustrating, isn't it?

Rest assured, this article has the answers you need to resolve this issue.

Key Takeaways:

  1. Locating the Valve: Depending on your washing machine’s make and model, you'll find the water valve at the back. It's typically connected to the main water supply via inlet hoses.
  1. Opening the Valve: To open or turn on the valve, turn it counterclockwise. If it's a lever, pull it down. Remember to wear gloves or use pliers for stiff valves.

  2. Regular Valve Care: Regularly check your valve for signs of rust or leaks. Clean it to prevent build-up, ensuring smooth operation. If it's faulty, consider a replacement to prevent water leakage and potential damage.

How to Turn ON the Water Valve on a Washing Machine?

If you've ever wondered how to turn on the water valve on your washing machine, or perhaps even what that means, I've got you covered. The water valve, also known as the inlet valve, is a crucial component of your washing machine. It controls the flow of water into your machine and is located near the wall where your washer is installed.

Turn on Coldwater Washer

Turning on the water valve on a cold water washing machine is relatively straightforward, and in my experience, can be done in a few simple steps. You should be aware that water valve types can vary depending on the make and model of your washing machine, but the basic steps remain the same.

  1. First, for safety concerns, unplug your washing machine and turn off your main water supply.
  2. Next, move your washing machine away from the wall to access its backside.
  3. Look for the water valve, which should be attached to the main water supply and connected to the washer via an inlet hose.
  4. To turn on the valve, you can use adjustable pliers to rotate it counter-clockwise.

It's also important to note that some washing machines have a self-locking mechanism in the inlet valve that works with water level sensors. The water enters the machine only when the sensors send a signal during a wash cycle.

Turn on Hot & Cold Washer

If you have a hot and cold washer, the process of turning on the water valve is similar to a cold water washer, with the only difference being that you have two valves to handle. One valve is for the hot water supply, and the other is for the cold water.

  1. Unplug your washing machine and turn off your main water supply for safety reasons, just as you would do with a cold water washer.
  2. Move your washing machine away from the wall to access the backside.
  3. You'll find two water valves at the back of your washing machine - one for hot water and one for cold water. Similar to the cold water washer, these valves will be attached to the main water supply and connected to the washer through inlet hoses.
  4. Use adjustable pliers to turn both valves counter-clockwise to open them.
  5. ![](https://washnowdry.com/wp-content/uploads/2023/07/clothe-son-for-washing.jpg)

What to do before Opening the water Valve on a Washing Machine?

Maintenance and Cleaning

Regular maintenance and cleaning are of utmost importance when it comes to any appliance, and the same goes for your washing machine. From what I've seen, ensuring that your machine's water inlet valves are clean and functioning correctly can drastically improve the performance and lifespan of your washing machine.

  1. Ensure that your washing machine is unplugged and your main water supply is turned off before you start cleaning.
  2. Detach the inlet hoses from the water supply valves. This might require you to loosen the clamps or roll the valve connectors.
  3. Once the hoses are detached, examine the water inlet valves for any signs of debris or buildup. In my experience, limescale or similar substances can often accumulate over time.
  4. If you find any debris or buildup, clean it off using a soft, damp cloth. Be careful not to use any harsh chemicals or abrasive materials as they can damage the valves.

Fixing or Changing the Valve

If you've noticed any issues with your washing machine's water supply, it could be due to a faulty water inlet valve. Here's how you can fix or change it:

  1. After making sure that your washing machine is unplugged and your main water supply is turned off, detach the hoses from the water supply valves.
  2. Examine the valves for any visible damage. If you find any, you may need to replace them.
  3. To replace a faulty valve, you'll first need to unscrew it from your washing machine. This can usually be done with a screwdriver.
  4. Once the faulty valve is removed, attach the new valve in its place and screw it in.
  5. Reattach the hoses to the water supply valves.
  6. ![](https://washnowdry.com/wp-content/uploads/2023/07/power-cord2-scaled.jpg)

Relocating the Machine

If you're planning to relocate your washing machine, it's important to remember to turn off the water valves first. This can prevent water leakage and potential damage to your machine.

  1. Unplug your washing machine and turn off your main water supply.
  2. Detach the inlet hoses from the water supply valves.
  3. Move your machine to its new location.
  4. Once your machine is in place, attach the hoses to the water supply valves in the new location.
  5. Turn on the water supply and plug your machine back in.

Wrap Up

In conclusion, knowing how to turn on the water valve on your washing machine can be quite handy, especially when you're trying to troubleshoot issues, perform maintenance, or relocate your machine. While the process might seem daunting at first, with a little practice, you'll find it's quite straightforward.

Frequently Asked Questions

What is the price for switching out the washing machine’s entry valve?

The price to replace a washing machine's entry valve can vary widely depending on your location and the model of your washing machine. On average, it can cost anywhere from $50 to $150.

How can I tell if the water valve on my washer is faulty?

If your washing machine isn't filling up with water as it should or if it's filling up too slowly, it could be a sign that the water valve is faulty. Other signs could include water leaks or the machine continuing to fill with water even when it's turned off.

Is it possible to mend a water inlet valve?

In some cases, you might be able to fix a faulty water inlet valve by cleaning it and removing any debris or buildup. However, if the valve is significantly damaged, it's usually more efficient to replace it.

Why is my washing machine water inlet valve not opening?

If your washing machine's water inlet valve isn't opening, it could be due to several reasons. There might be a problem with the valve itself, such as damage or buildup, or there could be an issue with the water level sensor that controls the valve.

Do you turn the tap on for washing machine?

Yes, you need to turn on the tap to allow water to flow into your washing machine. The tap should ideally be turned on before you start a wash cycle and turned off after the cycle is complete.

I hope this guide has been helpful in enlightening you on how to turn on the water valve on your washing machine. With a little practice and regular maintenance, you'll have no trouble keeping your machine running smoothly."

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments