How to Manually Drain a Speed Queen Washer - (Quick Guide)

How to Manually Drain a Speed Queen Washer – (Quick Guide)

Imagine you're in the middle of a laundry day when your Speed Queen washer suddenly decides to take a day off and refuses to drain. Now, you're stuck with a washer full of water and dirty clothes. Your frustration rises; this wasn't in your plan for the day, and you don't have the time to wait for a professional to fix it. But guess what? You can manually drain your Speed Queen washer yourself, saving time and avoiding a hefty repair bill.

Don't worry; this article has got you covered with straightforward steps to manually drain your washer.

Key Takeaways:

  1. Manually draining a Speed Queen washer requires basic tools such as a bucket, towels, and a plumber's snake for any potential blockages.
  2. The procedure includes unplugging the machine, locating the drain hose, and systematically draining the water into a bucket.
  3. For front-loading washers, an access panel at the bottom facilitates the task, requiring a shallow container to collect the water.

Reasons behind a Washer's Drainage System Failure

Before we dive into the steps to manually drain a Speed Queen washer, it's important to understand the reasons behind a washer's drainage system failure. By identifying the cause, you can take preventative measures to avoid future issues. Here are some common reasons why a washer's drainage system may fail:

  1. Clogs and Blockages: Over time, lint, debris, and other foreign objects can accumulate in the drain hose or drain pump, causing clogs and blockages. This can prevent water from draining properly, leading to standing water in the tub.

  2. Faulty Drain Pump: The drain pump is responsible for removing water from the washer's tub. If the pump becomes faulty or malfunctions, it may not be able to expel water efficiently, resulting in drainage problems.

  3. Incorrect Installation: Improper installation of the drain hose can also lead to drainage issues. The hose should be positioned correctly to ensure smooth water flow and prevent blockages.

Now that we understand the possible reasons behind a washer's drainage system failure, let's move on to the steps to manually drain a Speed Queen washer.


How Do You Manually Drain a Speed Queen Washer?

Manually draining a Speed Queen washer is a relatively simple process that can be done with a few tools and materials. Follow these steps to manually drain your Speed Queen washer:

  1. Prepare the Necessary Tools and Materials: Before you begin, gather the following items:
    • A bucket (a big one if your washer has a large capacity)
    • A shallow container (for front-load washing machines)
    • Towels
    • A plumber's snake (in case of blockages)
  2. Turn Off and Prepare the Washer: Start by turning off the washer, unplugging it from the power source, and turning off the water supply. Place towels around the washing machine to catch any spills and protect your floor.
  3. Locate the Drain Hose: Refer to the owner's manual to locate the drain hose at the back of the Speed Queen washer. Push the washing machine away from the wall to create space for easy access.

  4. Remove the Back Panel: In order to access the drain hose, you'll need to remove the back panel of the washer. This can usually be done by unscrewing or unclipping the panel.

  5. Disconnect the Drain Hose: Once you have access to the drain hose, loosen the clips or clamps and remove the drain hose from its position. Keep the hose elevated to prevent spills.

  6. Position the Bucket: Place the bucket at the mouth of the drain hose to collect the dirty water. Make sure the bucket is stable and secure.

  7. Let the Washer Drain: Allow the washer to drain all the dirty water into the bucket. If the bucket becomes nearly full, reconnect the drain hose temporarily to discard the wastewater. Once the bucket is empty again, position it back in place and remove the drain hose from the pipe to continue draining the remaining water inside the tub.

For front-loading washing machines, the process may differ slightly:

  1. Locate the Access Panel: Front-loading washers usually have an access panel at the bottom. Remove the cap at the end of the drain hose and drain the water into a shallow pan. Remember to replace the cap each time you empty the pan to avoid wetting the floor. Repeat this process until all the water inside the washer has been drained.
  2. Check for Blockages: If the water won't come out of the drain hose, remove the clothes and check for any blockages. Use a plumber's snake to reach hard-to-reach areas and push debris out of the way. You can also pour clean and hot water into the tub to help dissolve any dirt if necessary.


Suggestions for Keeping the Drain System in Good Condition

To prevent future drainage issues with your Speed Queen washer, here are some suggestions to keep the drain system in good condition:

  1. Regularly Clean the Drain Hose: Inspect the drain hose for any clogs or blockages and clean it thoroughly. You can use a plumber's snake to remove any debris that may be causing the blockage.
  2. Avoid Overloading the Washer: Overloading the washer can strain the drain pump and potentially lead to drainage problems. Be mindful of the recommended load capacity to ensure proper water flow and drainage.

  3. Use Proper Detergent: Using too much detergent or the wrong type of detergent can cause excess suds and potentially clog the drain system. Follow the manufacturer's instructions for the appropriate amount and type of detergent to use.

  4. Regular Maintenance: Schedule regular maintenance checks for your Speed Queen washer to ensure all components, including the drain system, are in good working condition. This can help identify any potential issues before they become major problems.

Frequently Asked Questions

How can you compel a Speed Queen to drain?

To compel a Speed Queen washer to drain, you can follow these steps:

  1. Turn off the washer, unplug it from the power source, and turn off the water supply.
  2. Position a bucket near the drain hose.
  3. Remove the drain hose from the pipe and position its mouth inside the bucket.
  4. Wait for the water to drain.
  5. Stop when the bucket is full and dump the dirty water in the sink.
  6. Resume draining the water until there's no more water left inside the tub.

Why does my Speed Queen washer leak?

There can be several reasons why your Speed Queen washer may be leaking, including:

  1. Worn Out Seals: Over time, the seals in the washer can deteriorate, leading to leaks. Inspect the seals and replace them if necessary.
  2. Loose Connections: Check for any loose connections in the water supply hoses or drain hose. Tighten them securely to prevent leaks.

  3. Damaged Tub: If the tub itself is damaged, it can cause leaks. Inspect the tub for any cracks or holes and replace it if needed.

  4. Excessive Detergent: Using too much detergent can cause excess suds and potentially lead to leaks. Use the recommended amount of detergent to avoid this issue.

If you're experiencing persistent leaks, it's best to consult a professional technician for further assistance.

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments