Is Your GE Washer Not Draining?

Is Your GE Washer Not Draining? Here’s How to Fix It!

As a GE washer owner, I've faced my fair share of draining issues. One day, I found the GE washer not draining, leaving a pool of water inside. This disrupted my laundry routine, leaving me frustrated and clothing unwashed. I learned from Akai Fowler's advice that overloading the tub or excess detergent could be culprits. The models most prone were the GE Top Load, Front Load, Hydrowave, and Stackable Washers. Regularly cleaning the washer's filter and avoiding overloading were some preventive measures.

Key Takeaways:

  1. Many users experience their GE washer not draining, a problem especially common in heavily used machines.
  2. Surprising reasons for this include excess detergent, overloading, and a clogged drain hose or pump.
  3. Cleaning the washer's filter regularly and avoiding overloading the machine are preventive measures.

This is just the tip of the iceberg; dive deeper into the article to understand the reasons behind this issue and how to solve them.

Top 5 Reasons Why Your GE Washer Isn't Draining Properly

Having a GE washer that isn't draining properly can be frustrating, especially when you have a pile of laundry waiting to be washed. But don't worry, I'm here to help you understand the top 5 reasons why your GE washer may not be draining properly and how to fix them.

1. The Drain Hose has Kinks or Obstructions

One of the most common reasons why your GE washer may not be draining properly is due to a kinked or obstructed drain hose. Over time, the drain hose can get twisted or bent, causing a blockage in the flow of water. Additionally, items like lint, small clothing pieces, or even coins can find their way into the drain hose, leading to a clog.

To clear the hose in your GE washer, follow these steps:

  1. Turn off the power supply to the washer to ensure safety.
  2. Locate the drain hose at the back of the washer and carefully remove it.
  3. Inspect the hose for any kinks or obstructions. If you find any, gently straighten the hose or remove the obstruction.
  4. Clean the hose with hot water or use a brush to remove any debris.
  5. Reconnect the drain hose securely to the washer.
  6. ![](https://washnowdry.com/wp-content/uploads/2023/07/GE-Washer.jpg)

2. Cleaning the Drain Pump Filter

Another common culprit for a GE washer not draining properly is a dirty drain pump filter. The drain pump filter is responsible for catching any debris that may have been left behind after a wash cycle. Over time, this filter can become clogged with lint, hair, or other debris, causing drainage issues.

To clean the drain pump filter in your GE washer, follow this guide:

  1. Turn off the power supply to the washer to ensure safety.
  2. Locate the drain pump filter at the bottom of the washer. It is usually behind an access panel.
  3. Open the access panel and carefully remove any obstructions you see, such as lint or clothing pieces.
  4. Clean the filter with cold water to remove any remaining debris.
  5. Reinstall the drain pump filter and secure the access panel.

3. Defective Drain Pump

If your GE washer is still not draining properly after checking the drain hose and cleaning the drain pump filter, the issue may lie with a defective drain pump. The drain pump is responsible for pumping out the water from the washer during the drain cycle. If it is not functioning correctly, the water may not be able to drain properly.

To identify a faulty drain pump, you can follow these steps:

  1. Turn off the power supply to the washer to ensure safety.
  2. Locate the drain pump at the bottom of the washer.
  3. Check the inlet and outlet hoses connected to the drain pump for any blockages.
  4. Manually spin the impeller blades of the drain pump to see if they move freely. If they are stuck or do not spin, it indicates a faulty pump.
  5. If you have a multimeter, you can test the drain pump for continuity. If there is no continuity, it means the pump is defective and needs to be replaced.

If you suspect a faulty drain pump in your GE washer, it is best to contact a licensed repair person for assistance in replacing the pump.

4. Damaged Door Lock on Front-Loading Machines

For front-loading GE washers, a common cause of drainage issues is a damaged or broken door lock. The door lock ensures that the washer door remains securely closed during operation. If the door lock is not functioning properly, the washer may not start the drain cycle or may stop mid-cycle.

To unlock a stuck washer door on a front-loading machine, you can follow these instructions:

  1. Turn off the power supply to the washer to ensure safety.
  2. If the cycle is still running, wait for it to finish before attempting to open the door.
  3. Look for a manual release cord located near the door lock mechanism. Pulling this cord will release the door lock.
  4. If your washer does not have a manual release cord, check if there is an emergency unlock feature mentioned in the user manual. Follow the instructions provided to unlock the door.
  5. If you are unable to unlock the door using the manual release cord or emergency unlock feature, it is recommended to contact the manufacturer or a professional technician for further assistance.

5. Malfunctioning Lid Switch on Top-Loading Machines

For top-loading GE washers, a faulty lid switch can be a common reason for drainage issues. The lid switch is responsible for detecting whether the lid is closed or open. If the lid switch is not functioning correctly, the washer may not start the drain cycle or may stop mid-cycle.

To replace a faulty lid switch on a top-loading machine, you can follow these steps:

  1. Shut off the power supply to the washer to ensure safety.
  2. Remove the top of the machine by locating the retaining clips or screws and carefully lifting it off.
  3. Locate the lid switch, which is usually located near the lid hinge.
  4. Remove the screws or wires that are securing the lid switch.
  5. Install the new lid switch by connecting the wires or screwing it into place.
  6. Reassemble the machine by placing the top back on and securing it with the retaining clips or screws.
  7. ![](https://washnowdry.com/wp-content/uploads/2023/07/washing-machine5.jpg)

Manual Drainage Procedure for a GE Washer

If you find yourself in a situation where your GE washer is not draining properly and you need to manually drain it, here are the steps you can follow based on the type of GE washer you have.

How to Manually Drain a Top-Loading GE Washer

  1. Disconnect the power supply to the washer for safety.
  2. Locate the drain hose at the back of the washer and disconnect it from the drain pipe or standpipe.
  3. Place the end of the drain hose into a large bucket or basin to catch the water.
  4. Slowly lift the drain hose higher than the water level in the washer to create a siphon effect.
  5. Once the water starts flowing out of the hose and into the bucket, you can lower the hose to control the flow.
  6. Allow the water to drain completely from the washer.
  7. Once the washer is empty, you can reconnect the drain hose to the drain pipe or standpipe.

Procedure to Drain a Front-Loading GE Washer

  1. Disconnect the power supply to the washer for safety.
  2. Locate the drain pump filter knob at the bottom front of the washer.
  3. Turn the knob counterclockwise to release it and pull it out.
  4. Place a shallow tray or towel under the filter to catch any water that may come out.
  5. Once the water has drained, unscrew the end cap of the drain pump filter and allow any remaining water to drain out.
  6. Clean the filter with cold water to remove any debris.
  7. Reinstall the end cap and the drain pump filter knob, ensuring they are securely in place.

Steps to Solve the Problem of GE Washer Not Draining

Now that you have a complete understanding of the top 5 reasons why your GE washer may not be draining properly, let's summarize the steps you can take to solve the problem:

  1. Check the drain hose for kinks or obstructions and clear them if necessary.
  2. Clean the drain pump filter regularly to prevent clogs.
  3. Inspect the drain pump for any signs of damage or blockages and replace if necessary.
  4. Address any issues with the door lock on front-loading machines to ensure proper drainage.
  5. Replace a faulty lid switch on top-loading machines to restore proper drainage.
0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments