Is Your Roper Washing Machine Stuck on Sensing Fill

Is Your GE Top Load Washer Not Starting? Solution Here!

Frustration bubbles up within me as I face my stubborn GE top load washer. Despite having power, the stubborn machine just won't start. I've followed a strict regimen of unplugging and replugging, checking the control lock, and inspecting the lid switch. Yet, my washer remains unresponsive. It's a common issue, yet a disturbing one - disrupting the rhythm of my daily life.

Key Takeaways

  1. There are multiple causes for a GE top load washer not starting despite having power - these can include a malfunctioning control panel, faulty lid switch, or even lack of water supply.
  2. Troubleshooting is essential and includes steps like power cycling the washer, checking control locks, testing lid mechanisms, and inspecting the control board.
  3. GE washers can break down due to their numerous moving parts, requiring careful maintenance and inspection of power sources, cords, circuit breakers, and washer settings.

This issue is more common than you'd think and can be a significant inconvenience. Intrigued to learn more? Let's dive into the depths of this washer conundrum.

How to Power Cycle Your Top-Load Washing Machine (For Reset Purposes)

One of the first troubleshooting steps you should try when your GE top load washer won't start is power cycling the machine. This action helps to reset the washer's internal components and can often resolve minor glitches that may be preventing the washer from starting.

To troubleshoot top-load washing machine, follow these steps:

  1. Unplug the washer from the power outlet.
  2. Wait for approximately 5 minutes.
  3. Plug the washer back into the power outlet.

After power cycling the washer, try starting it again to see if the issue has been resolved. If not, there may be other factors contributing to the problem.

Verifying if the Control Lock (Child Lock) is Activated

Another possible reason why your GE top load washer won't start is if the control lock, also known as the child lock, is activated. This feature is designed to prevent accidental changes to the washer's settings during operation. If the control lock is engaged, it can prevent the washer from starting.

To check if the control lock is activated and disable it if necessary, follow these steps:

  1. Look for the control lock button on the washer's control panel. It is usually labeled with a small padlock icon.
  2. Press and hold the control lock button for a few seconds until the control lock indicator light turns off, indicating that the control lock has been deactivated.

Once you have disabled the control lock, try starting your washer again to see if the issue has been resolved. If the washer still won't start, there may be other underlying causes that need to be addressed.

Inspection and Testing of the Lid Switch and Lid Lock Mechanisms

The lid switch and lid lock mechanisms play a crucial role in ensuring the safety and proper operation of your GE top load washer. If these components are faulty or malfunctioning, they can prevent the washer from starting.

To inspect and test the lid switch and lid lock mechanisms, follow these steps:

  1. Open the washer's lid and locate the lid switch. It is usually located near the door hinge and is activated when the lid is closed.
  2. Check if the lid switch is damaged or loose. If it appears to be in good condition, proceed to the next step. If it is damaged or loose, it may need to be replaced.
  3. Close the washer's lid and listen for a clicking sound. This indicates that the lid switch is functioning properly.
  4. If you don't hear a clicking sound when the lid is closed, the lid switch may be faulty and will need to be replaced.

Additionally, some GE top load washers are equipped with a lid lock mechanism that ensures the lid remains securely closed during operation. If the lid lock is not engaging properly, it can prevent the washer from starting.

To test the lid lock mechanism, follow these steps:

  1. Close the washer's lid and wait for a few seconds.
  2. Listen for a clicking sound, which indicates that the lid lock has engaged.
  3. If you don't hear a clicking sound or if the lid lock is not engaging properly, it may need to be replaced.

Water Supply to Your Washer

A common reason why a GE top load washer won't start is when there is no water supply to the machine. Without water, the washer cannot initiate the wash cycle. Therefore, it's important to verify if there is a proper water supply to your washer.

To ascertain if there's water supply to your washer, follow these steps:

  1. Check if the water faucets connected to the washer are turned on. Make sure that both the hot and cold water faucets are fully opened.
  2. Inspect the water inlet valve screen located at the back of the washer. If it is clogged with debris, clean it to ensure proper water flow.
  3. Examine the water hoses connected to the washer for any kinks or obstructions. Straighten any kinks and remove any obstructions that may restrict water flow.
  4. ![](https://washnowdry.com/wp-content/uploads/2023/07/Comfee-Portable-1.jpg)

Evaluating the Timer of the Washer

The timer on your GE top load washer controls the various cycles and operations of the machine. If the timer is faulty or not functioning correctly, it can prevent the washer from starting.

To evaluate the timer of your washer, follow these steps:

  1. Locate the timer on the washer's control panel. It is usually a rotating dial or a digital display.
  2. Set the washer to a specific cycle and start the machine.
  3. Observe if the timer is advancing or if it remains stuck at a particular point.

If the timer is not advancing or is stuck, it may be defective and will need to be replaced. A malfunctioning timer can prevent the washer from moving through the different cycles and starting the wash cycle.

Conducting a Test on the Washer’s Motor

The motor of your GE top load washer is responsible for driving the various components of the machine, such as the agitator and the spin cycle. If the motor is faulty or not functioning properly, it can prevent the washer from starting.

To conduct a test on the washer's motor, follow these steps:

  1. Disconnect the power supply to the washer to ensure your safety.
  2. Locate the motor and remove the wiring connections.
  3. Use a multimeter to test the motor for power and continuity. If there is no continuity, it indicates a faulty motor that needs to be replaced.

Reviewing the Control Board

The control board, also known as the user interface control board or the main control board, is responsible for receiving and executing the commands from the washer's control panel. If the control board is damaged or malfunctioning, it can prevent the washer from starting.

To review the control board, follow these steps:

  1. Disconnect the power supply to the washer to ensure your safety.
  2. Access the control board, which is usually located behind the washer's control panel.
  3. Inspect the control board for any signs of damage, such as burning or melted wires.
  4. If there are visible signs of damage, the control board will need to be replaced.

FAQ

Why does my GE washer have power but won't start?

There could be several potential causes for a GE top load washer not starting despite having power. Some possible reasons include a malfunctioning control panel, a faulty lid switch, or a lack of water supply. By following the troubleshooting steps mentioned in this article, you can identify and address these issues.

Why does my GE top load washer click but won't start?

If your GE top load washer clicks but won't start, it could indicate a problem with the lid switch or lid lock mechanism. These components ensure that the lid is securely closed during operation. If they are faulty or not functioning properly, the washer may not start. Inspecting and testing the lid switch and lid lock mechanisms can help identify and resolve this issue.

Why won't my washer start when I press start?

If your washer won't start when you press the start button, it could be due to various reasons. Some possible causes include a malfunctioning control board, a faulty motor, or a defective timer. By conducting tests and inspections on these components, you can determine the underlying cause and take appropriate steps to fix the issue.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments