GE Deep Fill Washer Troubleshooting – Quick Fixes for Common Issues

Are you experiencing issues with your GE Deep Fill Washer? Don't worry, you're not alone.

Many users encounter common problems such as the washer not starting, failing to fill, not rotating, not draining properly, continuously being stuck in sensing mode, or trouble with agitation. In this comprehensive guide, we will decode the error codes, identify frequent issues, and provide troubleshooting steps to help you resolve these problems.

So, let's dive in and get your GE Deep Fill Washer back up and running smoothly!

Key Takeaways:

  1. GE Deep Fill Washer problems are common but can often be fixed by the user, saving both time and money.

  2. Running a diagnostic can help identify error codes, leading to more accurate troubleshooting of issues like the washer not starting, filling, or draining.

  3. If a GE Deep Fill Washer develops a bad odor or leaks, solutions include cleaning the machine thoroughly or inspecting hoses and valves for damage.

How to troubleshoot a GE Deep Fill Washer?

When your GE Deep Fill Washer encounters a problem, it often displays error codes to help you identify the issue. These error codes can provide valuable insights into what's wrong with your washer.

To find the error codes, you'll need to put your washer in diagnostic or service mode. Here are the steps to follow:

  1. Previous Error Clearance: Clear any previous error codes by disconnecting the power to the washer for a few minutes.

  2. Power Disconnect: Unplug the washer from the power source.

  3. Test Mode: Press and hold the Start button while plugging the washer back in. Continue holding the Start button until the washer enters the test mode.

  4. Recent Error Codes: The washer will display any recent error codes that were stored in its memory.

  5. Error Clearance: Clear the error codes by pressing the Start button again.

  6. Exit Test Mode: To exit the test mode, unplug the washer once more and then plug it back in.

Now that you know how to find the error codes, let's take a look at some of the most common issues users encounter with their GE Deep Fill Washers.

Identifying Frequent Issues with GE Deep Fill Washers

1. Issues with Starting the Washer

If your GE Deep Fill Washer won't start, there could be several reasons behind it. Here are some possible causes and DIY fixes:

  • Power loss or fault: Ensure there's power by checking the fuse, breaker, and power cord. If necessary, replace any faulty components.

  • Open lid: Make sure the lid is closed properly and securely.

  • Washer not turned on: Check if the washer is turned on and if the controls are not locked.

  • Drain obstructions: Clear any obstructions in the drain to ensure proper functioning.

  • Faulty timer or user control board: If all else fails, you may need to replace the timer or user control board.

2. GE Deep Fill Washer Failing to Fill

If your GE Deep Fill Washer is not filling with enough water, consider these potential causes and solutions:

  • Water faucets not turned on: Ensure that the water faucets connected to your washer are fully turned on.

  • Kinked fill hose: Check the fill hose for any kinks or twists that may be restricting water flow. Straighten the hose if necessary.

  • Dirty filter screen: Clean the filter screen located at the water inlet valve to remove any debris or sediment that may be blocking the water flow.

  • Stuck fill valve: Sometimes, the fill valve can get stuck, preventing water from entering the washer. Try cleaning or replacing the fill valve to resolve the issue.

  • Low water pressure: Insufficient water pressure can also affect the filling process. Check your home's water pressure and contact a plumber if needed.

  • Defective water inlet valve or power issue: If all else fails, you may need to replace the water inlet valve or address any underlying power issues.

3. GE Deep Fill Washer Not Rotating

If your GE Deep Fill Washer is not rotating or spinning, here are some possible causes and troubleshooting steps:

  • Load imbalance: Make sure the load in the washer is balanced. Unevenly distributed laundry can cause the washer to not rotate properly.

  • Overload or under-load: Avoid overloading or under-loading the washer, as this can affect its ability to rotate.

  • Unleveled washer: Check if the washer is leveled properly. Adjust the leveling feet if necessary to ensure stability.

  • Hard water or wrong temperature: Hard water or selecting the wrong temperature can impact the washer's rotation. Consider using soft water and choosing the appropriate temperature setting.

  • Faulty lid switch, door lock, drive belt, motor coupling, drive motor, bearing, or drive pulley: If the above steps don't resolve the issue, you may need to inspect and replace any faulty components.

4. GE Deep Fill Washer Not Properly Draining

If your GE Deep Fill Washer is not draining properly, consider these troubleshooting steps:

  • Kinked or clogged hose: Check the drain hose for any kinks or clogs. Straighten the hose or remove any blockages.

  • Clogged or faulty pump: Inspect the pump for any clogs or damage. Clean or replace the pump as needed.

  • Open lid: Ensure that the lid is closed properly, as an open lid can prevent the washer from draining.

  • Extended drainage height: If the drain hose is positioned too high, it may impede proper drainage. Adjust the height to allow for smooth water flow.

  • Faulty lid switch: A defective lid switch can also cause drainage problems. Test the lid switch and replace it if necessary.

5. GE Deep Fill Washer Continuously in Sensing Mode

If your GE Deep Fill Washer is stuck in sensing mode, here are some possible causes and solutions:

  • Drain clogging or faulty transmission: Check for any drain blockages and clear them. If the transmission is faulty, it may need to be replaced.

  • Faulty water inlet valve, shift actuator, or control board: Inspect these components and replace any defective parts accordingly.

6. Trouble with Washer Agitation

If your GE Deep Fill Washer is not agitating, consider these potential causes and troubleshooting steps:

  • Worn-out or defective agitator repair kit, drive belt, drive block, motor coupling, drive motor, wash plate, or door lock: Inspect these parts and replace any that are worn-out or faulty.

Resetting Your GE Deep Fill Washer

If you've tried troubleshooting your GE Deep Fill Washer and the issues persist, you may need to reset the washer. There are two reset options you can try:

Option 1 - Resetting the Electronic Controls

To reset the electronic controls of your GE Deep Fill Washer, follow these steps:

  1. Unplug the washer from the power source.

  2. Wait for a few minutes.

  3. Plug the washer back in and try using it again.

Option 2 - Resetting the Motor

To reset the motor of your GE Deep Fill Washer, follow these steps:

  1. Unplug the washer from the power source.

  2. Open the washer lid.

  3. Spin the agitator by hand in a clockwise direction for a few revolutions.

  4. Close the lid.

  5. Plug the washer back in and try using it again.

These reset options can often resolve minor issues and get your washer back on track.

Final Thoughts

We hope this guide has provided you with a comprehensive understanding of GE Deep Fill Washer troubleshooting. Remember to always follow safety precautions and refer to your washer's user manual for specific instructions.

By following the troubleshooting steps outlined in this article, you can save time and money by resolving common issues on your own. If all else fails, don't hesitate to seek professional assistance.

Happy washing!


Q: Why is my GE deep fill washer not filling with enough water?

A: There are several possible causes for your GE Deep Fill Washer not filling with enough water. It could be due to water faucets not turned on, a kinked fill hose, a dirty filter screen, a stuck fill valve, low water pressure, a defective water inlet valve, or a power issue.

Follow the troubleshooting steps provided in this guide to address these issues.

Q: Is there a reset button on GE washers?

A: GE washers typically don't have a physical reset button. However, you can reset the washer by unplugging it from the power source and waiting for a few minutes before plugging it back in.

Q: Why is my GE washer not filling up all the way on the rinse cycle?

A: If your GE washer is not filling up all the way on the rinse cycle, it could be due to the same reasons as the washer not filling with enough water. Check the water faucets, fill hose, filter screen, fill valve, water pressure, water inlet valve, and power supply to address the issue.

Q: Why is my GE deep fill washer shaking?

A: Shaking or vibrating during the wash cycle is often caused by an unbalanced load. Make sure to distribute the laundry evenly in the washer drum to minimize shaking.

Additionally, ensure that the washer is leveled properly to prevent excessive movement.

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments