How to Reset Frigidaire Affinity Washer?

How to Reset Frigidaire Affinity Washer? Quick help!

Here we go, my tale with the Frigidaire Affinity washer. It has truly changed my life. One day, it stopped working right in the middle of a cycle, leaving me with a pile of dirty laundry. I thought I needed a technician, but then I stumbled upon the reset process. It's quite simple, really. I unplugged it for a few minutes and then tried the spin speed and soil level button trick. And voila, my washer was back on track, saving my day and my budget.

Key Takeaways:

  1. The Frigidaire Affinity washer can be reset by unplugging it for a few minutes or by pressing and holding certain buttons.
  2. Resetting the washer can help solve issues like a stuck washing cycle or the machine not turning on after a power outage.
  3. If resetting doesn't solve the issue, further troubleshooting or professional repair might be necessary.

Remember, the next time your washer acts up, don't panic, a simple reset might just do the trick. Dive into our article to learn more about the process.

Frigidaire Affinity Washer Reset: Troubleshooting and Tips

Error codes can be frustrating to deal with, but they often indicate an underlying issue that can be resolved by resetting the washer. Here are the steps to reset the error codes on your Frigidaire Affinity washer:

  1. Turn the program knob to the start position (spin only).
  2. Press the START/PAUSE button to start the cycle and save it.
  3. Press the CANCEL button to stop the cycle and turn off the LEDs.
  4. Press the CANCEL button again to turn on the LEDs.
  5. Press and hold the OPTIONS and START/PAUSE buttons until the LEDs start sequentially chasing.
  6. Turn the program knob clockwise 7 clicks from the start position to display the last error code.
  7. Press and hold the OPTIONS and START/PAUSE buttons for at least 3 seconds to clear the code.
  8. Exit the diagnostic mode to return the washer to normal operation.
  9. ![](https://washnowdry.com/wp-content/uploads/2023/07/affinity-washer.jpg)

Steps to Exit Diagnostic Mode

After performing a reset or troubleshooting the error codes, it's important to exit the diagnostic mode to ensure your Frigidaire Affinity washer functions properly. Here are two methods to exit the diagnostic mode:

Method 1:

  1. Unplug the power cord from the electrical outlet.
  2. Wait for 5-8 seconds.
  3. Reconnect the power cord to the electrical outlet.
  4. Your Frigidaire Affinity washer should now be out of the diagnostic mode and ready for use.

Method 2:

  1. Turn the program knob clockwise 2-3 times from the start position.
  2. Press and hold the OPTIONS and START/PAUSE buttons simultaneously until the wash cycle LED lights appear.
  3. Your washer should now be out of the diagnostic mode and back to normal operation.

Resetting Frigidaire Affinity Washer: How to Reset if Normal Cycle Stopped Functioning

If you find that the normal cycle on your Frigidaire Affinity washer has stopped functioning, don't worry. There are steps you can take to reset it and get your washer back to working order. Here's what you can do:

Approach 1:

  1. Rotate the knob to any cycle.
  2. Press and hold the spin speed and soil level buttons until the display shows "Restore default".
  3. Release the buttons.
  4. Your Frigidaire Affinity washer should now be reset, and the normal cycle should start functioning again.

Approach 2 (If Your Frigidaire Affinity Washer Refuses to Reset):

  1. Turn the dial to the wash mode.
  2. Press and hold the spin speed plus options buttons.
  3. Wait for the LED screen to show "CLR".
  4. Press the "Start" button.
  5. Re-enable temperature and spin speed selections/options.
  6. Your washer should now be reset and ready for use.

Approach 3:

  1. For the FFFW5000QW0 model, hold the SPIN SPEED+OPTIONS buttons until the LED screen shows "CLR".
  2. Your Frigidaire Affinity washer should now be reset and back to normal operation.
  3. ![](https://washnowdry.com/wp-content/uploads/2023/07/affinity.jpg)

When is the Right Time to Reset Your Frigidaire Affinity Washer?

Knowing when to reset your Frigidaire Affinity washer can save you time and frustration. Here are a few situations where a reset may be necessary:

If the Washing Cycle is Jammed and Taking More Time than Usual to Finish

If you notice that your washing cycle is stuck and taking longer than usual to finish, it may be time to reset your Frigidaire Affinity washer. This can often resolve any issues causing the cycle to become jammed and return your washer to normal operation.

Frigidaire Affinity Not Powering On After Electrical Disruption

After a power outage or electrical disruption, your Frigidaire Affinity washer may not power on. In such cases, wait for at least half an hour before attempting to reset the washer. Sometimes, the control board needs time to reset itself. If the washer still doesn't power on, performing a reset can often solve the problem.

It's important to note that while a reset can resolve many issues, there may be instances where further troubleshooting or professional repair is necessary. If a reset doesn't solve the problem or the issue persists, consult the Frigidaire Affinity washer manual or contact the company for assistance.

FAQ

Why is My Frigidaire Washer Not Finishing the Cycle?

If your Frigidaire washer is not finishing the cycle, it could be due to various reasons. Some possible causes include an unbalanced or uneven load, a malfunctioning control board, or an issue with the water supply. Performing a reset can often resolve the problem, but if the issue persists, further troubleshooting or professional repair may be necessary.

Why is My Frigidaire Affinity Stuck on Pause?

If your Frigidaire Affinity washer is stuck on pause, it could be due to a control board malfunction or an issue with the door lock mechanism. Try performing a reset by following the steps outlined in this article.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments