How to Drain an LG Washer - (Quick Guide to Force Draining)

How to Drain an LG Washer – (Quick Guide to Force Draining)

Ever found yourself faced with a pool of standing water in your LG washer? It's a problem that can be as baffling as it is frustrating. This scenario can disrupt your daily routine, getting in the way of your laundry schedule and potentially damaging your washer. The good news? You can resolve it by learning to drain an LG washer.

Rest assured, this article is committed to providing you with the solutions you need.

Key Takeaways:

  1. Knowing how to drain your LG washer is essential - whether due to power cuts, unexpected objects in the tub, overloading, or your washer refusing to drain.
  2. There are different methods to drain your washer, such as the spin-only cycle, manually force-draining the machine, and manual draining through the drain hose and lever.
  3. Always consult your user manual before proceeding with troubleshooting steps, and ensure any faulty components or blockages in your washer's drainage system are fixed before draining.

Why Should You Drain Your Washer and When

There are several reasons that may require you to enforce a drain. By understanding these instances, you can take the necessary steps to ensure your washer functions optimally. Let's take a closer look at some common scenarios where a drain becomes necessary.

Instances of Power Failure

Power outages can occur at any time, leaving your washer unable to complete its cycle. In such cases, the water in the machine may need to be drained before you can resume washing your clothes. This is where the drain function comes in handy. By draining the water, you can prevent any potential damage to your washer and ensure a smooth operation once the power is restored.

Presence of Unwanted Items in the Basin

Have you ever accidentally left a tissue in your pocket, only to discover it has disintegrated and left bits of paper all over your clothes? Or perhaps you've found small objects, like coins or hairpins, that have made their way into the washer's basin. These unwanted items can not only clog the drain pump but also damage the other components of your washer. By enforcing a drain, you can remove these items and prevent any further issues.

Excessive Loading

It's tempting to cram as many clothes as possible into the washer to save time and energy. However, overloading your LG washer can lead to poor drainage and even damage the machine. When there's too much water and not enough space for it to flow freely, the drain may become overwhelmed. By enforcing a drain and reducing the load, you can ensure proper drainage and avoid any potential issues.

Non-Responsive Washer Drain

Sometimes, your LG washer may simply refuse to drain the water, leaving you with a basin full of soapy water and soggy clothes. This can be frustrating, especially when you're in a hurry. In such cases, enforcing a drain can help resolve the issue. By manually draining the water, you can clear any blockages and get your washer back up and running smoothly.

Breakdown of Washer Components

Over time, various components of your LG washer may wear out or malfunction, leading to drainage problems. Whether it's a faulty drain pump or a clogged drain filter, these issues can prevent proper water flow and result in standing water in the basin. In such cases, it's essential to address the underlying problem and enforce a drain to prevent any further damage to your washer.

Now that we understand the reasons and timings for enforcing a drain on your washer, let's dive into the steps involved in draining an LG washer.

What are the Steps to Drain an LG Washer?

Draining an LG washer can be done in a few different ways, depending on the model and type of washer you have. Let's explore three common techniques for draining an LG washer, including step-by-step instructions.

Technique 1: Utilize the Spin Only Function

The spin-only function is one of the most common ways to force drain a washing machine. This function is designed to drain the water from the washer before spinning the tub, making it an ideal method for draining the machine.

To use the spin-only function on your LG washer, follow these steps:

  1. Select the appropriate cycle on the control panel.
  2. Press the "Spin Only" button.
  3. Adjust the spin speed if necessary.
  4. Press the "Start" button to begin the drain and spin cycle.

If the spin-only cycle does not work or is not available on your LG washing machine, don't worry. There are other methods you can try to manually drain the washer.

Method #2 Enforcing a Manual Drain on Your LG Washing Machine

If the spin-only function is not effective or unavailable, you can manually force drain your LG washing machine. Here's a step-by-step guide to help you through the process:

Step 1: Disconnect the Washer from its Power Source

Before you begin any maintenance or troubleshooting on your washer, it's essential to disconnect it from its power source. This ensures your safety and prevents any potential electrical hazards.

Step 2: Procure a Bucket

To catch the water as it drains from the washer, it's helpful to have a bucket or container ready. This will prevent any water from spilling onto the floor and creating a mess.

Step 3: Detach the Drain Filter Cover

Locate the drain filter cover on your LG washer. This is typically located at the front bottom of the machine. Use your hand or a tool to remove the cover and expose the drain filter.

Step 4: Release the Water

Once the drain filter cover is removed, you will see a small hose or plug. Carefully remove the hose or plug to release the water from the washer. Direct the water flow into the bucket or container you prepared earlier.

Step 5: Cleanse the Drainage Filter

After draining the water, it's a good idea to clean the drainage filter to remove any debris or buildup. Gently remove the filter and rinse it under running water. Use a soft brush or cloth to remove any stubborn dirt or grime.

Step 6: Tidy up the Surrounding Area

While you have the drain filter cover off, take the opportunity to clean the surrounding area. Wipe down any excess water or dirt, ensuring a clean and tidy workspace.

Step 7: Replace the Filter

Once the drainage filter is clean and dry, place it back into its original position. Make sure it is securely in place to prevent any leaks or issues during future use.

Step 8: Return the Drain Filter Cover to its Original Position

After replacing the filter, carefully reattach the drain filter cover. Ensure it is properly aligned and securely fastened to prevent any water leakage.

Step 9: Conduct a Test Run

Now that you have completed the manual drain process, it's a good idea to conduct a test run to ensure everything is functioning correctly. Reconnect the washer to its power source, select a cycle, and monitor the drainage to confirm that the issue has been resolved.

Technique 3: Manual Draining via the Drain Hose and Control Lever

In some top-load models of LG washers, you can manually drain the water from the back of the machine using the drain hose and control lever. Here's how you can do it:

Step 1: Cut off the Power Supply to the Washer

As with any maintenance or troubleshooting task, it's crucial to disconnect the power supply to the washer before proceeding. This ensures your safety and prevents any electrical mishaps.

Step 2: Detach the Water Supply Hoses

To access the drain hose, you'll need to detach the water supply hoses from the back of the washer. Use pliers or a wrench to loosen the hose connections and gently remove them.

Step 3: Relocate the Washer

Carefully move the washer away from the wall to gain access to the back panel. This will allow you to see the drain hose and control lever more clearly.

Step 4: Disconnect the Drainage Hose

Locate the drain hose and disconnect it from the back of the washer. This hose is responsible for carrying the water out of the machine and into the drain. Ensure you have a bucket or container ready to catch any water that may flow out.

Step 5: Drain the Washing Machine

With the drain hose disconnected, you can now manually drain the water from the washer. Gently tilt the washer forward, allowing the water to flow out through the hose and into the bucket or container.

Step 6: Reassemble Everything

Once the water has been drained, reassemble the washer by reconnecting the drain hose and water supply hoses. Ensure all connections are secure and tight to prevent any leaks.

By following these step-by-step instructions, you can successfully drain your LG washer and resolve any drainage issues you may be experiencing.

Wrap Up

Draining an LG washer is an essential maintenance task that can help prevent damage, ensure optimal performance, and resolve drainage issues.

FAQs

How can I force my washing machine to drain?

If your washing machine is not draining properly, there are a few methods you can try to force the drain:

  1. Utilize the spin-only function on your washing machine, if available.
  2. Manually drain the water by following the step-by-step instructions provided in this article.
  3. Disconnect the drainage hose and drain the water using a gravity drain or a siphon.

How do you manually drain water from an automatic washing machine?

To manually drain water from an automatic washing machine, you can follow these general steps:

  1. Disconnect the power supply to the washer.
  2. Locate the drain filter or drain hose.
  3. Remove the drain filter or hose and direct the water flow into a bucket or container.
  4. Clean the drain filter or hose, if necessary.
  5. Replace the drain filter or hose and secure it back into place.
  6. Conduct a test run to ensure proper drainage.
0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments